Printable View (3 KB)
Article No. 95-18-10	IDLE - ROUGH - REVISED TORQUE SPECIFICATION FOR INJECTOR HOLD-DOWN BOLT - BEGINNING BUILD DATE 2/1/94 FOR 7.3L DI TURBO EQUIPPED F-250/350/SUPER DUTY MODELS
Publication Date: SEPTEMBER 11, 1995

ISSUE:

A rough idle or miss may occur on some vehicles.  This may be due to a loose injector hold-down bolt.

ACTION:

Whenever the valve cover is removed, increase the torque on all injector hold-down bolts to 13.6 N-m (120 lb-in).  When installing an injector for any reason, tighten injector hold-down bolt to 13.6 N-m (120 lb-in).  Refer to the 7.3L Diesel Service Manual Supplement for injector servicing.

OTHER APPLICABLE ARTICLES:

NONE

WARRANTY STATUS:

INFORMATION ONLY

OASIS CODES:

600000, 608000, 608400