Printable View (28 KB)
Article No. 96-21-17	TRANSMISSION - E4OD - UNIQUE OVERDRIVE RING GEAR, ONE-WAY CLUTCH RETAINING RING AND SHAFT RETAINING RING - SERVICE TIP
Publication Date: OCTOBER 7, 1996

This TSB article is being republished in its entirety to revise the applicable models and years.

ISSUE:

Some 1996 and 1997 vehicles with E4OD transmissions were built with unique overdrive ring gears, one-way clutch retaining ring and center shaft retaining ring (Figure 1).

ACTION:

If service is required on any of these unique transmissions and replacement of either the overdrive ring gear, one-way clutch retaining ring or center shaft retaining ring is required, all three (3) parts must be replaced.  Use current level parts for replacement.

OTHER APPLICABLE ARTICLES:

NONE

SUPERSEDES:

96-06-11

WARRANTY STATUS:

INFORMATION ONLY

OASIS CODES:

504000