|
Re: Trailer brake controller mounting
It depends on what type of brake controller you've got as some have to be perfectly level to function well. So make sure you can get it to the position that you want whereever you mount it. If you've got a prodigy then it's not as critical and you can just mount it where you've indicated. (that's where mine is). I used 2 coarse threaded wood screws and pre-drilled the holes (small) and it's holding really nice without backing plates. Probably be a nicer installation to use machine screws and a backing plate though.
Regards,
Dave
__________________
2002 Excursion Limited - 7.3 PSD, 4x4, Auto. Tekonsha Prodigy Controller. ISSPRO EV Gauges in A-Pillar mount. Diesel Turbo Lifesaver. Pre-pump Mod. SCMT-Trimode. AIC. Back Door storage bins. Banks 3 1/2 inch Monster Exhaust. AIS. "U-Code" Springs. Powerstroker Exhaust Brake. Husky Liners. Bilstein Shocks. ART Brakes, Helwig Rear Anti-swaybar. Zoodad Mod. Airlift Rear Airbags. Racor 3550 CCV. Forest River Wildcat 26FBS TT.
2003 VW Jetta TDI - completely stock and 49mpg!
2003 Kubota B2910
|
