|
Re: floorboard vibrations
I was jacking around w/ my exhaust last weekend and didnt know the dp had twisted into the firewall/floorboard transition and had a vibration. Get your truck up the speed at which it vibrates the worst and then engage the clutch/slide into neutral, if the vibe goes away instantly then its in the driveline.
__________________
Randy 
Midnight black '94 * F-250 * 4x4 * ZF-5 * 4:10 * cc/lwb * RDS Single Shot Stage I's* TDP 6pos chip * BDP electric fuel * BDP 1.0 exhaust housing * Hypermax 3x4" dp * Authentic Tymar intake* 7.3 Intercooler * gutted ebpv * 4" exhaust & 5" tip * LUK clutch * A-pillar pod w/ Auto Meter NV boost, pyro and water temp gauges * reverse dash lighting and hvac controls * Optima yellow top batts D75/25, both on the right side * HPO X-over mod * manually controlled gp's * cruise control mod * add-a-leaf (front) * AC mod
|
