|
Re: 5th wheel hitch position? Forward, Rear or over back axle?
With regards to the B&W - I've done 3 so far: 2 fords and 1 chevy.
The Ford is easier and if you take your time, read the instructions a few times (download and read while the parts are enroute) prepare a bit you'll save money and enjoy doing it yourself.
B&W is a very straightforward install - and I have written up my how I do it in other posts - but I have been really impressed at the kists. Sure it's going to tak you longer to do, but really i recommend it.
Day one - order the parts and remove the heat shield.
Day two - get the hole saw and 1/2 drill bit from Home Depot - maybe install in-bed 6/7-way outlet. Measure and drill hole.
Day three - install hitch - finish up wiring.
I think that's the best way to do it - or drill the hole after seeing hte kit just to give you peace of mind.
ANyway - if you were here - I'd say come on over. The last time - we spent more timme removing the Chevy heat shield then installing the hitch - and the undercoating is still in my hair.....
__________________
99.5 F-250 CC LB 4x4 7.3 Red, Trail Boss Replacement Bumpers, Tool Box, Headache Rack, Full Length Running Boards, Bilstien Shocks, Isspro A-Pillar Gauges, Isspro TTM, Ford AIS, BFG AT/KO 285/75x16, Magnaflow 3.5" DP - 4" Exhaust, 2003 Cup Holder, X-Springs, Rear 4" F350 Blocks, ATS Housing, Edge Evolution (Rev. 19), Banks Big Head, DS Boost Relief, Weather Tech Rain Vents / Hood Guard, B&W GN Hitch, Sonnax/Tricum
NRA
Ducks Unlimited
My Truck Pics
|
