|
Re: HIH vs HOH
Repower – no issue with hijacking the thread. I think it is a good topic and you may want to start a new thread on automatic vs manual cutover to VO.
I had planned on an elaborate gauge setup but overran my budget. I was planning on building my own in tank heater but the parts were going to run me $80 so I opted to bite the bullet and get a hotfox.
As for the gauges I was planning on putting them in the same place as my cswitch over sensors. Water temp at the return point to get the lowest possible reading and the VO oil temp right before one of the fuel rail and a fuel pressure gauge in front of the other fuel rail.
__________________
2007 F250 Outlaw, 2 inch lift, 37 inch BFG AT, 5 inch turbo back, Hypertech, Airaid and an improvised WVO system.
Freedom does not come free...
Thanks to all that have served and to those who are actively protecting the freedom that we take for granted!
<u>Semper Fi to my extended family...</u>
Old Green Leatherneck - Saving the world one french-fry at a time.
|
