|
Got the 38R in!
If there is one thing we have over the f series guys, it is ease of turbo replacement!!
First thing I did was cut the 4" 90 coupler I picked up from Arne's shop. (johncantos) Awesome place and I only saw the showroom. Arne wasn't there  , still need to meet him.
The coupler originally had 9" legs. I cut it close to the original elbow size, then put in a 4" pipe and tightened the clamp to the exact spot I needed it cut and ran a utility knife next to the clamp. Worked good.
I removed the stock turbo, it came out with no problem. Here is side by side of the stock and 38r.
__________________
2003 E-350 7.3, 38R, DIY intake, 4" turbo back, Swamps Tunes, forged rods, exhaust ported heads, comp 910's, h-11's, stealth twin pumps, 300cc hybrids, racerx trans and tc, water injection
Last edited by rpm1; 01-30-2008 at 04:56 PM.
|
