|
I loosened the rear hanger for the tail piece and turned the pipe as much as i could and only got about another 1/4 to 1/2" away from the body. So my tail pipe is about an inch clear from the body, better than it was...but still too close in my opinion. I was maybe looking at modifying by dropping the bracket that holds the rubber grommet, but i am not sure if that help, I think i will just leave alone, again still looks way better than the stock pipe and i do notice a difference in the backpressure, especially at highway speeds, seems to not labor as much....
__________________
2008 F250 6.4L 4 X 4 (Job 1) Crew Cab Lariat Shift on the fly, 3.73 White w/ medium stone leather interior, Banks 4" Single Monster Exhaust, Billet front and side grilles, XM Radio, Rhino Liner...
|
