Here's the specs for the Dana 60 rear axle for the van.
Dana 60 van axle specs.jpg
The hub nut is a ratcheting affair on the Sterling axles used on the SRW pickups. They use a "click" method of adjustment, but the Dana axle is apparently different. Couldn't find the actual hub removal instructions in the service CD for the van.
On both axles, the wheel bearings get packed with grease, but are actually lubed by the axle lubricant, with the grease just for initial lubrication.
Hope that helps.
__________________
First truck -- 1929 Model A Ford pickup, restored from ground up. Wish I still had it!
99.5 F250 PSD Supercab LB 4x4, 6spd, 3.73LS, Boost & pyro gauges, Swamps S175/146 injectors, Jody's 80 HP Econo PCM (classic version
), AIS,
coolant filter w/"hokum" bracket, regulated return,
heated mirror mod, lighted cupholder, Marinco heater plug-in.
Hard or no-start? Check here
