|
spring question
i have a 2001 X. I've read and read the old spring posts but have a question. At this time there is about 2.5" between the spring pack and the frame, and the bump stops have been ripped off (from this apparently) I just want the front to sit back like it should most likely level with the rear. Do i need a set of V code springs? or will this be to much height? thanks for your help.
__________________
 2001 Excursion Limited, 4x4, toreador red, 4" turbo back exhaust, DYI Tymar intake
92 F350 CC SRW,7.3 E4OD 4x4
4" lift 35" tires, 4.10, 4" exhaust straight pipe  ,
ATS nwg turbo, rebuilt and balanced, holley red, new IP & injectors, rebuilt heads by me
 A pillar triple pod, auto meter phantom gauges,
pyrometer, boost, trans temp, oil pressure & water temp
future upgrades: ?
formerly known as; pullmyfinger
http://community.webshots.com/user/pullmyfinger76
|
