|
Build a test setup with an electric motor and machine a pulley to bolt onto the injector pump to drive it...but at that rate you would be miles ahead to install it and give it a whirl. Or take it to a local diesel shop...that's essentially what one of ours has on display to show how the major brand injectors have very dissimilar spray patterns.
__________________
1994 Ford F250 4x4: 7.3L IDI factory turbo, supercab longbed, E4OD *DEAD*. ZF5 swap,Dana 60 swap, GM 14 bolt rear w/ 4.10s, 4" exhaust from stock downpipe back to a 5" stack, IP maxed=1100 degrees max pulling uphill, "modified" wastegate=11psi max,99+ F450SD cab/chassis leaf springs in rear
--motor/trans sold--
2000 VW Jetta TDI = 48+mpg
1997 Dodge 3500: 2WD Cab & Chassis, 12V Cummins, 47RE Automatic, Dana 80, 194,000mi. Parting out.
1989 12V VE Cummins out of Chevy C60? at the machine shop...going into the Ford.
Member of Indiana Air National Guard 122FW MXS
|
