Quote:
Originally Posted by keithminn
Yes the test light stays on once touched to the neg post and clamped to the neg cable. I pulled all the fuses under the dash ( funny they squeezed it in -- considering the amount of room in the truck - I digress) but the light still stays on -- any hints on where to look next? There is no radio and all other items are off and fuses pulled -- something is drawing power from is a mystery.
|
I dont know if these will still operate without fuses: Key off and out of ignition..
1) Is your dome light on/ door open when you are checking this?
2) Hood light above engine?
3) Consider removing the fusible links one at a time, then look in repair manual wiring diagram to identify area.
