|
What makes carrier bearings fail?
I replaced mine under regular maint about 75K ago. Monday night it completely failed, and spit all the rollers out of it.
I drove another 100+ miles like this beating the races to a pulp, but thankfully did not damage the shaft.
What causes these things to fail?
__________________
1996 F-250 extended cab long box five speed. Home made Tymar, 203 Stat, 60 gal in bed fuel cell, 315/75's, no muffler, ebpv welded open 3" to 3" DP, Babies. 290K, still chugging, and still smoking when cold.
UPDATED 8/1/08 Replace so far. 1 LUK flywheel+clutch, 2 thermostats, 2 set of brakes, 1 set of calipers, 5 CPS, 3 sets of tires, 2 Transfer pumps, 1 Injector modual, 1 Computer, 2 Alt, 2 sets of batteries, 1 Water pump, 6 Belts, 1 PS hose, 2 Sets ball joints, 2 set u-joints, 2 carrier bearing, 2 Speed sensors, 1 oil pres sender, 1 temp sender, 4 sets of e-break cables, 1 front fuel tank, 2 rear fuel tanks, 2 set of glow plugs, 6 Glow plug relays, Oil galley o-rings, Turbo pedistal o-rings, EBPV o-rings, 3 sets of Injector O-rings, 1 Vac-pump, 1 new carpet.Total $$$ in repairs v/s miles driven = 3.0 cents per mile. Add fuel to that it jumps to 14.8 cents per mile over the life of the truck.
|
