WMO and centrifuge
I recieved My centrifuge from Simple Centrifuge as of Friday. I bought all the plumbing supplies yesterday to go from a 55 gal. drum thru an immersion heater and finally thru the centrifuge.
I am thinking about 1 quart per minute at 140 degrees F. I plan to filter only WMO at first and then mix 50/50 with #2 after. Later I may premix before running thru the centrifuge.
Any ideas or advice on anything that I might be overlooking?
Just so everyone will know My investment so far is $2,600. This is for the centrifuge $2275, immersion heater $205,and plumbing supplies $89. I expect maybe $100 more for a 250 gallon tote tank and maybe a couple more 55 gallon drums.
I am running 2 trucks, a 97 and a late 99 ford which combined use approx. 100 gallons per week.
If one calculates the savings baseing #2 diesel at $3.50 per gallon then that is an annual savings of $9100 per year on a 50/50 mix thus recovering My innitial investment in a little over 3 months.
|
