Quote:
Originally Posted by jimyz250
any other people on here have newer trucks? I have an 04 psd with 6.0, I have used 100% wvo for a few tanks, then heard of the wmo that you are all running, I just brought home my first 55 gls from work, but after reading this thread I wonder about the newer DI motors. I am only planning on running at most a 50/50 mix probably more like 60/40 so who has run this stuff in di motors and how has it been.
|
If your only asking about DI (direct injection) motors it works great as all 7.3l powerstrokes are DI. But I amsuming your asking about 6.0 motors and what not. There are a few in this thread that are running wmo in a 6.0, some say that it is not recomended because of lower injection preasures, but I really don't know. I do have a buddy running 100% waste compressor oil through his duramax. While it does run, his is hard to start cold and sluggish till it warms up. However my 75% waste oil 25% diesel mix starts great and doesn't seem to suffer even when cold.
So I've got just over 800 miles now. I am on my second 55 gallon drum of oil and my first 55 gallon drum netted me 76 MPPG (miles per perchased gallon)!
Justin
__________________
'96 F250 Crew Cab Short Bus, E40d, 4.10, D60, Hard Knox RSK, SD Springs front and rear, Hard Knox Winch Bumper, Warn 10k winch, 38 gallon rear tank, 305s on stock Alcoas IDM mod
|
