Yep I have it working now.
I removed the computer and chip. Not to fun on the OBS trucks. Cleaned all the connections w/some 600 paper and electromotive cleaner.
Reinstalled the computer and chip. Plugged in the USB cable and the utility screen works perfect. Shows the tunes I have and also the two revised tunes.
When I first installed the tunes the 2-3 shift was at about 2900-3000 rpm WFO. I had asked Jody to up this to 3500 rpm. This revision was sent to me in an e-mail,how cool. Installed this in the device utility in the correct colume.
I've been out wasting fuel ever since.
Kent
