Quote:
Originally Posted by fwbkent
Yep I have it working now.  I removed the computer and chip. Not to fun on the OBS trucks. Cleaned all the connections w/some 600 paper and electromotive cleaner.
Reinstalled the computer and chip. Plugged in the USB cable and the utility screen works perfect. Shows the tunes I have and also the two revised tunes.
When I first installed the tunes the 2-3 shift was at about 2900-3000 rpm WFO. I had asked Jody to up this to 3500 rpm. This revision was sent to me in an e-mail,how cool. Installed this in the device utility in the correct colume.
I've been out wasting fuel ever since. 
Kent |
Great, glad you got it working! 
Don't go blowing any tranny seals now... ya hear! 
__________________
-Steve
'95 F-250 Ext. Cab long bed 7.3L 4:11 2WD
IDM Mod, HPX, DIY Intake
|
