|
Update...
It was the fuel heater! I just unplugged it on the outside of the bowl...no problem w/plastic breaking. Replaced fuse #22, and everything is good again.
Except, I have no turn signals or hazards. I'm guessing it is the flasher.
I started the truck w/the drain open, and it blew the crap out of the line. I'll be doing this more regularly now that I know the procedure.
I'll be sticking around here. Tons of good info. Now I'm looking at doing an air filter upgrade from my K&N, and probably an exhaust (at least a down pipe).
Thanks!
Graham
|
