|
Truck not running correctly
Okay guys, I am just about at my wits end. I have been researching on this awesome site for several weeks now, but I am stuck. I recently put in a new IDM, glow plug relay, UVCH on drivers side, 4 glow plugs on drivers side, icp sensor, ipr, cps, changed fuel filter, changed engine oil and filter. All this was done for several codes I got when the truck just stopped running one day while driving.
So I started it yesterday and it started right up. Ran for about 10 minutes then died. I got the following codes: P0472, P1210, and B1483.
When the ICP is connected the truck takes 3-6 tries to get it started up again after I turn it off. Any suggestions would be much appreciated.
Dave
__________________
black 2000 f-350, diesel, auto, 4wd, 134,000
35 inch bfgoodrich tires
Front end leveling kit from Summit
chopped exhaust just beyond cab
Greasable ball joints and u joints everywhere
Open air intake 6637
Issopro Guages-white with blue lighting
Coolant filter with Evans coolant
203 degree thermostat
Rebuilt Tranny
2005 F-350 Dump, 11 ft dump-Gas 16,ooo miles
1995 Ford Crown Victoria-Green 175,000 Miles
1993 Ford Mustang, All white Limited Edition 99,000 Miles
|
