|
Re: Where to grab coolant from engine
Thanks for the reply. I was going to ask if it had good flow/velocity but if it is feeding the heater core, it must be good. It didn't dawn on me that the coolant inside the engine had that much flow at all times.
I really like that it is a 1/2" npt port rather than a 3/8"... much better for feeding that 3/4" hose.
Anybody else try to access this port on a SD/PSD?
Todd
__________________
2002 F-250 Lariat, PSD, CC, short bed, 3.73, auto tranny, Line-X bed liner, AFE Filter, HX crossover, intake heater delete, Evans NGC+, Dieselsite 203 thermostat, coolant filter, Amsoil by-pass filter, Schaeffer's synthetic blend tranny fluid, Bob Riley's tranny filter, Velvet Ride shackles, Rancho 9000 shocks with in-cab adjustment, 60 gallon aux tank for burning heated WVO, burning veggie since fall of '04.
|
