|
Re: Where to grab coolant from engine
Yesterday I helped a buddy install a WVO system in his PSD. We got the coolant from the driver's side head port mentioned in this thread. We used a tee to introduce the WVO system coolant to the line from the heater core back to the engine. My buddy just called to say the system isn't getting warm. Could the flow from the heater core be greater than the flow coming from the veggie system, effectively stopping the veggie coolant flow?
Anybody have any problems routing all the coolant from the engine through the WVO heating loop and then on to the heater core?
Todd
__________________
2002 F-250 Lariat, PSD, CC, short bed, 3.73, auto tranny, Line-X bed liner, AFE Filter, HX crossover, intake heater delete, Evans NGC+, Dieselsite 203 thermostat, coolant filter, Amsoil by-pass filter, Schaeffer's synthetic blend tranny fluid, Bob Riley's tranny filter, Velvet Ride shackles, Rancho 9000 shocks with in-cab adjustment, 60 gallon aux tank for burning heated WVO, burning veggie since fall of '04.
|
