The Diesel Stop banner

315 tires with what size leveling kit?

1K views 5 replies 5 participants last post by  Andrew G 
#1 ·
About to pull the trigger on a 2000 F-350 reg. cab 4x4 dually. Looking to build a "Practical Work truck" so to speak. It will be a daily driver, plow truck, trailer tower and occasional dirt road rig. Looking to run a set of 315's (35"s) on it. What size leveling kit should I run? 2.5 front? 3.5" front + 1" rear? Gonna run wheel spacers too. (What size?) Thanks guys!
 
#2 ·
I would go 3.5 I have 2.5 on my truck and it scrubes on sharp turns on the drivers side wi it h 305 70r16 on my truck.
 
#3 ·
Wheel width and offset is a factor.
 
#6 ·
351 75 16 BFG Radial All Terrain TA KO2s on a 16X10 rim rub when taking turns into or out of a parking lot. I've got a 2 inch leveling kit up front and nothing on the back, and the truck looks level unloaded. Even when I loaded up 2700 pounds in the back, there weren't any clearance issues with the rear tires.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top