|
rear block change
I changed the rear block to 4 inch factory to raise the rear to match the x spring on the front and after doing so i had a vibration at 65-75 speed and also on heavy acceleration. Had the rear end shimmed with a 3 degree wedge and its fine now.....Just wanted to let ya'll know.....
__________________
01 PSD Excursion XLT 4x4 Wedgewood blue,Born on 3/21/01,Delivered 9/01/01, Troy console w/GPS&Cb radio, catch-all floor mats,clear corner lenses,dynomax race bullet muffler,x springs & 4"rear blocks, Bilstein 5100 series on all 4 corners. BFG AT 33x12.5x16.5 on Eagle 589 16.5x9.75, XM Radio
http://community.webshots.com/album/31624777lldOsSCXcI
|
Linear Mode
