I recently installed the Husky Splash Guards (Mud Flaps) on the front and rear. I’m still accumulating dirt, rocks, water etc. on the back end of the running board as there’s no “flap” to keep this stuff off - the frontward side of the rear wheel-well.
Has anyone got a good solution – like adding a third set of flaps there – don’t want anything too lame looking.
Suggestions??? Comments???
Thanks - goldframe
------------------
00 Excursion LTD 4X4 PSD , Estate Green, Born 3/13/00 - Bought 9/21/00 - Code AXD0, Western Diesel 50, Diesel Turbo Life Saver, BFG Long Trail, K&N, Hellwig Rear, Pro Comp shocks & stabilizer, PS Diesel V8 “badges”, Husky Splash Guards, Locking Wheel Nuts
__________________
‘00 Excursion LTD 4x4 PSD, Estate Green, LSRD, Born 3/13/00 - Bought 9/21/00, Western Diesel 80 hp Chip, Diesel Turbo Life Saver, Cyclone Power Fan, V code front springs with Add-A-Leaf, ProComp rear Add-A-Leaf, Goodyear Wrangler AT/S 285/75R16, stock pipes 3.5 in. & 4 in. Magnaflow, K&N, Hellwig Rear, ProComp ES9000 shocks & stabilizer, PS Diesel V8 “Badges” sides & rear, dual Hella electronic horns, Husky Splash Guards mud flaps, Locking Wheel Nuts
goldframe I had fiberglass running boards put on mine-the type that are painted and go fron top of the front fender well to the back of the rear fender well. Don't hane hardly any of what you mentioned.
s and hope this helps.
Ed
------------------
Y2K EXCURSION LMTD. PSD FIBERGLASS RUNNINGBOADS SUNVISOR & and other goodies.
NRA&TX.ST.RIFLE ASSC.-LIFER-NRA/ILA AND MEMBER-GUN OWNERS OF AMERICA MEMBER-I DO VOTE!
[This message has been edited by H ED S (edited 11-06-2000).]
__________________
<font color="red">~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~</font> SMILES and the best to all**Ed-<font color="red">RETIRED</font>**OINKING-BILGE-RAT <font color="red">FREEDOM IS NOT FREE ! ! !</font>
2005 LTD. X PSD 2WD FIBERGLASS RUNNINGBOARDS; SUNVISOR: REAR DEFLECTOR
<font color="00FF00">BENEFACTOR**<font color="red">NRA</font>**<font color="red">LIFER</font>**<font color="red">TX.ST.RIFLE ASSOC</font>**<font color="red">GOA</font>**<font color="00FF00">MEMBER</font>**<font color="00FF00">NRA/ILA</font>**<font color="red"> I VOTE ! DO YOU ? </font>**QUACK*QUACK ! ! !
<font color="00FF00">~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~</font>
goldframe:
I added the flat Ford flaps to the front of my rear wheel well and they work fine. Was offroad preparing snowmobile trails last weekend and the TOP of the running boards is mud free.
I used some black plastic spacers to give the proper fit to the outside end of the running board. I drilled carefully and put a stainless nut and bolt thru, near the light, to keep the flap flat. I also trimmed them some, they were too long for my usage.
YC3Z-16A550-AA pair of flat splash guards. black with 'Ford oval' in white about $20
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
