Ford Diesel Forum / Powerstroke Forum
Ford Diesel Forum / Powerstroke Forum
Go Back   Diesel Forum - The Diesel Stop.com > 1999-2007 Super Duties > Upgrades and Aftermarket - 7.3L Engine
Register Home Forum Active Topics Gallery Search Today's Posts Mark Forums Read

Upgrades and Aftermarket - 7.3L Engine Upgrading and adding aftermarket equipment to your 1999-Up Super Duty or Excursion with 7.3L Power Stroke diesel engine. Please confine discussion of topics in this forum to those items that are specific to the 7.3L Power Stroke engine.

       
Reply
 
LinkBack Thread Tools Display Modes
Old 07-23-2005, 11:00 AM   #1 (permalink)
Senior Member
 
Join Date: Aug 2002
Location: Upper Penninsula, Michigan
Posts: 836
iTrader: (0)
My Photos: (2)
Dynatrac wheel bearing kit article in August 2005 issue of Trailer Life magazine!!!

I got my August 2005 issue of Trailer Life magazine and found an interesting article about the Dynatrac Superduty front wheel bearing retrofit kit. Dynatrac's website seems rather lacking on info on the wheel bearing only kit. The Trailer Life article has a lot of good info for those of us looking for a better alternative than the P.O.S. factory front bearing hubs.
__________________
Early 99 F-250 4x4 SC, Dominator 66 Turbo, Stage 1 Single shot Injectors and Wildman chip from Beans, BTS Tranny w/ V-10 tranny cooler w/auxillary tranny cooler, MBRP 4" stainless exhaust system, Hutch Mod with WIX prepump fuel filter, Ford Air Intake System w/ foam intake sleeve, KCM H/X mod, CCV breather mod, Coolant Filter kit, Trans-temp in dash. BD Exhaust Brake and TorqLoc, ICPW Clear headlights w/headlight harness and Silver Star headlight bulbs, Gauges: EGT, Boost, Fuel Pressure and vacume system, all 4 on the A pillar, 100 gal aux. tank in bed. Dynatrac front hub conversion, Diesel Innovations FPR Shim kit.

Tail_gunner's Webshots
Tail_Gunner is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Advertisement
 
Old 07-23-2005, 11:04 AM   #2 (permalink)
Senior Member
 
Join Date: Aug 2002
Location: Upper Penninsula, Michigan
Posts: 836
iTrader: (0)
My Photos: (2)
Re: Dynatrac wheel bearing kit article in August 2005 issue of Trailer Life magazine!!!

Moderator: My bad. I just realized I may have posted in the incorrect forum. [img]/ubbthreads/images/graemlins/phoney.gif[/img]

Please feel free to move to proper forum.
__________________
Early 99 F-250 4x4 SC, Dominator 66 Turbo, Stage 1 Single shot Injectors and Wildman chip from Beans, BTS Tranny w/ V-10 tranny cooler w/auxillary tranny cooler, MBRP 4" stainless exhaust system, Hutch Mod with WIX prepump fuel filter, Ford Air Intake System w/ foam intake sleeve, KCM H/X mod, CCV breather mod, Coolant Filter kit, Trans-temp in dash. BD Exhaust Brake and TorqLoc, ICPW Clear headlights w/headlight harness and Silver Star headlight bulbs, Gauges: EGT, Boost, Fuel Pressure and vacume system, all 4 on the A pillar, 100 gal aux. tank in bed. Dynatrac front hub conversion, Diesel Innovations FPR Shim kit.

Tail_gunner's Webshots
Tail_Gunner is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-23-2005, 01:15 PM   #3 (permalink)
Senior Member
 
WAMPAKU's Avatar
 
Join Date: Jul 2002
Location: PALM DESERT, CA
Posts: 686
iTrader: (0)
My Photos: (14)
Re: Dynatrac wheel bearing kit article in August 2005 issue of Trailer Life magazine!!!

its considerd an after market product. i just bought the combo kit @ 3200 [img]/ubbthreads/images/graemlins/eek.gif[/img] they have the smaller version where it just replaces the bottom end only. the combo kit does cross over steering, new trac bar relocation with bar, new steering linkage,etc. the samll kit runs abot 1600 if i remember correctly.
__________________
99.5 F350XLT CC LB 4X4, 8" SUPERLIFT, 17X10 WELD SANDSTORMS, 40/13.50X17 GOODYAER MT/R, AIR INTAKE HEATER PLUG, AFE STAGE II, WHICKED WHEEL,JOHN WOODS TANNY STAGE II, DYNATRAC SUPER DUTY COMBO KIT, AGR ROCK RAM SYSTEM, 6 POSITON CHIP WITH JODY TIPTON BURNS, HOG 4" TURBO BACK EXHAUST, 4.56 GEARS FRONT AND BACK WITH ARB AIR LOCKERS, ARB AIR COMPRESSOR
ECLIPSE 5495, SOUNDSTREAM CONTINUUM, 2 PAIRS ECLIPSE SC8365 3WAY COMPONENTS, ECLIPSE SW9102 SUB. 10" FLIP DOWN SCREEN, PS2, AND LOTS MORE!
truck pics
2002 EXCURSION LIMITED 7.3TDI, AFE STAGE II, DIPRICOL GAUGES, DP TUNER F5 CHIP, 4" HOG PERFORMANCE TURBO BACK EXHAUST
2005 VOLKSWAGON JETTA 1.9TDI, KERMA QLOADER, 100 HP AND 40+MPG IF I AM GOOD.
WAMPAKU is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Diesel Forum - The Diesel Stop.com > 1999-2007 Super Duties > Upgrades and Aftermarket - 7.3L Engine



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

» Log in
User Name:

Password:

Not a member yet?
Register Now!

» Wheel & Tire Center

Sponsors

Powered by vBadvanced CMPS v3.0 RC2

All times are GMT -5. The time now is 08:57 PM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0