Ford Diesel Forum / Powerstroke Forum
Ford Diesel Forum / Powerstroke Forum
Go Back   Diesel Forum - The Diesel Stop.com > Ford Diesels > Power Strokes 1994-1997 General
Register Home Forum Active Topics Gallery Search Today's Posts Mark Forums Read

Power Strokes 1994-1997 General Technical discussion of topics related to vehicles powered by the Power Stroke engine in 1994 through 1997 models.

       
Reply
 
LinkBack Thread Tools Display Modes
Old 01-29-2007, 04:36 PM   #1 (permalink)
Member
 
Join Date: Mar 2006
Location: Burlington VT
Posts: 53
iTrader: (0)
My Photos: (1)
Good Mechanic In New Jersey?

Hello,
I just dropped my truck off at a "good" local mechanic. I have not used him before but I heard a lot of good things about him and our trucks. I have hard cold starts. Installed a new GPR Relay recently but it did very little to change the starts. Batteries are good and starter is relatively new. I believe it is glowplugs. I asked if he could please check the glowplugs and do an oil change. He calls me back and says its is normal to cycle the glowplugs 3 times like I have been for the last 2 months to start it in the cold. When I got the truck a year ago I only had to cycle them once and wait about 30 secs after the light goes out and it would start right up. He also told me that the glowplugs also only work while the light is on...I did not feel like arguing. I am almost ready to take it to the dealer and have them check the glowplugs. I really do not have have time or a warm place to play with the volt meter.
Sorry about the long post...any help would be greatly appreciated.
George-
__________________
95 F-350 Crew Cab Long Bed, 5spd, 4X4, Super Duty Springs, Reverse Shackle, Cold Air Intake, Coolant bypass filter, Fuel Pressure Guage. 252000 Miles. Not as sweet as the last one but really cheap.

96 F-250 Crew Cab Short Bed...KandN cold air intake, Edge Programer, 3.5inch downtube. 200000 miles- SOLD
surlybluebeast is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Advertisement
 
Old 01-29-2007, 05:47 PM   #2 (permalink)
Senior Member
 
v_lombardi's Avatar
 
Join Date: Aug 2001
Location: Gulfport, Mississippi, USA
Posts: 1,068
iTrader: (0)
My Photos: (18)
Re: Good Mechanic In New Jersey?

where in jersey?

vince
__________________
1996 F-350 auto XLT CC SRW 4x4 off road. Hypermax dp, Hayden aux elect fan, 285/75-16 BFG at's, factory ford locking hubs, 6,900#'s empty.
Integrity: Steadfast adherence to a strict moral or ethical code. PHOTOS
v_lombardi is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 01-29-2007, 05:49 PM   #3 (permalink)
Member
 
Join Date: Mar 2006
Location: Burlington VT
Posts: 53
iTrader: (0)
My Photos: (1)
Re: Good Mechanic In New Jersey?

Newton/Andover: Northern
Thanks,
George
__________________
95 F-350 Crew Cab Long Bed, 5spd, 4X4, Super Duty Springs, Reverse Shackle, Cold Air Intake, Coolant bypass filter, Fuel Pressure Guage. 252000 Miles. Not as sweet as the last one but really cheap.

96 F-250 Crew Cab Short Bed...KandN cold air intake, Edge Programer, 3.5inch downtube. 200000 miles- SOLD
surlybluebeast is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 01-29-2007, 05:54 PM   #4 (permalink)
Junior Member
 
Join Date: Jan 2007
Location: lethbridge,alberta,canada
Posts: 9
iTrader: (0)
My Photos: (0)
Re: Good Mechanic In New Jersey?

take it to the dealer!!!! your jersey mechanic sound like just that,not a technician.
coop42 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 01-29-2007, 05:57 PM   #5 (permalink)
Senior Member
 
v_lombardi's Avatar
 
Join Date: Aug 2001
Location: Gulfport, Mississippi, USA
Posts: 1,068
iTrader: (0)
My Photos: (18)
Re: Good Mechanic In New Jersey?

marvin's auto care
chatham, new jersey
973-635-7629 profile
tell him i sent you.
vince
__________________
1996 F-350 auto XLT CC SRW 4x4 off road. Hypermax dp, Hayden aux elect fan, 285/75-16 BFG at's, factory ford locking hubs, 6,900#'s empty.
Integrity: Steadfast adherence to a strict moral or ethical code. PHOTOS
v_lombardi is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 01-29-2007, 06:05 PM   #6 (permalink)
Member
 
Join Date: Mar 2006
Location: Burlington VT
Posts: 53
iTrader: (0)
My Photos: (1)
Re: Good Mechanic In New Jersey?

vince thank you.
__________________
95 F-350 Crew Cab Long Bed, 5spd, 4X4, Super Duty Springs, Reverse Shackle, Cold Air Intake, Coolant bypass filter, Fuel Pressure Guage. 252000 Miles. Not as sweet as the last one but really cheap.

96 F-250 Crew Cab Short Bed...KandN cold air intake, Edge Programer, 3.5inch downtube. 200000 miles- SOLD
surlybluebeast is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 01-29-2007, 06:27 PM   #7 (permalink)
Senior Member
 
gnxtc2's Avatar
 
Join Date: Jul 1999
Location: Fort Lee, NJ, USA
Posts: 1,533
iTrader: (0)
My Photos: (7)
Re: Good Mechanic In New Jersey?

Dependable Truck & Auto Repair
Hackensack, NJ
201-342-8896

Billy T.
gnxtc2@aol.com
__________________
'97 Black F250HD,XLT, SC, LB, 4x4, Suncoast E40D, Triple Disk Converter, Dana 60, 3.55LS, built 12/97, 3"-4" DP, Bilstein 5125s, VDO EGT, Trans Temp, and Boost gauges, Hellwig rear swaybar, CA fuel regulator, 4" Exhaust-Straight piped,FORD AIC, welded EBPV, B&M Transpan, Cryo slotted rotors, Tony Wildman 4 position chip, Joe Servo IDM, MAP sensor mod, Blackbird rear disc conversion, RSK w/ "V" & "F" code SD springs, Hydroboost conversion, replacement 38 gal rear tank, Swamp's Baby Hybrids, CJC Traction blocks, 169K

PICTURES OF IT ALL

Fort Lee, NJ
gnxtc2 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Diesel Forum - The Diesel Stop.com > Ford Diesels > Power Strokes 1994-1997 General



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

» Log in
User Name:

Password:

Not a member yet?
Register Now!

» Wheel & Tire Center

Sponsors

Powered by vBadvanced CMPS v3.0 RC2

All times are GMT -5. The time now is 02:31 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0