I have been looking @ the shopdiesel.com 5" exhaust. I hear the tail pipe section off the super duty kit can be used on the 94-97 trucks. But am I on my own from there? Does anyone know if any other pieces from the 5" system work? I would just like it to look like a clean job. I know I will have to weld in a sleeve in place of the muffler but was hoping that would be it.
__________________
97 F-250 CC, BDP Fuel System, BDP Stage 1's, TS 6 Pos. Chip, Tymar Intake, 5" Straight Pipe...I have a few other upgrades, but these are the only ones that really matter
I got mine from a truck supply and thier kit was for a SD over the axle. No muffler, kitty, etc., no problem. Swamps gave me the number or company, I cant remember. Try a search.
__________________
96 F-350 4x4 CC LB, International block and heads from Mcandless IH in Denver, <span style="color: red">Baby Swamps </span>, Luk Cerametallic Clutch, 5" straight exhaust,5 speed ZF, 4.10's, Evolution programmer, Banks brake, non-EBPV IH turbopedestal, AFE Magnum force, CA reg. kit, 12,000 lb. Milemarker on reciever mount, 215amp ambulance alt., 33" muds on factory aluminum, Class 5 bumper hitch, hidden gooseneck, pillar gauges, fosgate amp, 12" sub.
Colorado National Gaurd.
"Firearms stand next in importance to the constitution itself. They are the American people's liberty, teeth and keystone under independece. When Firearms go, all go's. We need them every hour!"
President GEORGE WASHINGTON
I just installed a 5" straight pipe last month. It went very smooth. I used the shopdiesel over axle peice and picked up a 10ft section of 5" and the proper reducers from NAPA. It took about 4hrs to remove old exhaust till cleanup. Here are a couple pictures from the job, hopefully they will work, but I doubt they are 56k friendly.
I did the exact same thing arcane did as he said not too bad of a job. The exhaust sounds really good, I get quite a few compliments on it! Once you do it you'll really like it!! [img]/ubbthreads/images/graemlins/smokin.gif[/img]
Justin
__________________
98 12V QC, 282,000 +, 5 Speed, with a few power enhancements
SOLD
2000 F-350 XLT CC SRW CC PSD, 249,000+Miles, 6 Speed trans with Luk Con-O-FE clutch, 4" ATS Straight piped, Tymar style intake, Ready to start modding.
Meridian Motorsports Dyno Jet 5/13/2006
219 HP 457 TQ
SOLD:
Lifted 95 F-350 XLT Crew Cab Srw Lwb Psd, 268,000 + miles, 35*12.50*16.5 Trail Cutter Radial RT,4.10's, BABY SWAMPS, Humped HPOP, Homeade Tymar setup with custom 4" intake, Gutted EBPV, Modified turbo pedistal, 1.0 turbine housing, CTI AIC, Auto Meter Lunar gauges, BDP 5 position chip, Complete Alpine sound system, Automatic, Billet torque converter, Tru Cool 28,000 lb external trans cooler, Bully Dog down pipe, 5" twin turnout stacks, 6.0 intercooler with custom built pipes, Optima red top batteries, Wanting more mods!!! My webshots homepage
Bully Dog Dog Days Of Summer Dyno Pull 7/9/2005
347 hp 660 torque
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
