Anyone have dyno runs with Wildman/BDP combos?? - Diesel Forum

dirtmover · 12-02-2005, 08:12 PM

Hey all,
Like it says, anyone have dyno runs with Tony's race or extreme burns running BDP stage I injectors???? I have more people ask me "what's that thing got" and I can't tell them cause I don't know [img]/ubbthreads/images/graemlins/shrug.gif[/img].

Anyone have a setup close to mine??

Thanks

Steve

rckcrlr · 12-02-2005, 08:24 PM

I'd love to know to, we are set up very similar.

ThreeStarJR · 12-02-2005, 08:25 PM

Hey Steve! how's it goin man! Bean's rule of thumb on the one's is around 100 hp give or take a few each way. You and I have the same set-up so we should be on the + side of 310 @ the fly wheel, or being very optimistic we're 310 @ the wheels [img]/ubbthreads/images/graemlins/biggrin.gif[/img]

BIGBEAN · 12-02-2005, 08:38 PM

I have a sheet in the office of 320hp. Every truck and every dyno will be slightly differnt but to compare simular MDII trucks with H2e's were about 330-340 the same day and other Swamp powered trucks were low 300's to high 200's. Havent gotten as much dyno feedback as I expected on Stage I's. Its somethin to go off of though.

Oh ya, one other one was a 02 SD that did 350hp at Indy with Stage I's.

BigStroker · 12-02-2005, 09:09 PM

I had a guy tell me the other day his Camero just had some bolt on parts......then he said "Dude that turbo whistle is SICK it can't be stock. What is under the hood?" I replied "Oh just some bolt on stuff.......while blowing smoke" [img]/ubbthreads/images/graemlins/smokin.gif[/img]

AlanB · 12-02-2005, 09:11 PM

I'm not sure on hp, but with stage I hypermax injectors and Wildman programing I did a 14.4 in the 1/4. I would guess more than 350 hp.

Oh ya, I had some extra oil to go with it [img]/ubbthreads/images/graemlins/smokin.gif[/img]

swh22 · 12-02-2005, 09:21 PM

I've got the dyno graphs somewhere in my webshot pics. 300/580 with a wildman extreme (actually 2 of his burns that did almost identical #'s). That was with throwing a low hpop code though, so it's not a maximum possible out of the stage I's but it's probably a realistic expectation if you have a stock hpop with 150K+ miles on it.

ryanPSD · 12-02-2005, 09:35 PM

I am hoping to dyno mine in the next couple months. I will definitely post the results!

CUR3406B · 12-02-2005, 09:36 PM

hey, this is exactly what i have been thinking about. [img]/ubbthreads/images/graemlins/shocked.gif[/img]

you take a stock motor,throw some air & exaust at it,a good hot chip with wide pw, big oil, & bdp stage I's. [img]/ubbthreads/images/graemlins/ooo.gif[/img]

anyone running this setup? if so pm me with your thoughts and/or dyno results. [img]/ubbthreads/images/graemlins/smokin.gif[/img]

Rtxcoon · 12-02-2005, 10:35 PM

284 rwhp, 555 tq July 23rd in Dallas, 105* day, mustang dyno, 3300# rollers...
35" tires, 3.55 gears, overdrive OFF,(pre IDM mod also), no intercooler, with a miss, I have issues I havent quite figured out... might be oil, not sure...

TravisT · 12-03-2005, 12:05 AM

311 hp and 638 lbs at Indy last year. I was hoping for near 350 but my oil pump looses pressure and who knows what else. I'd like to see what big oil or SD pump will do.

FWIW - Andrew's white F250 with stage 2s, stock turbo, and sd pump did 371hp and 738 lbs.

those were both with the new twildman extreme

dirtmover · 12-03-2005, 08:42 PM

Jim I'm doing well. How goes it your way?? Sounds like this combo is for 300 horse. I wasn't expecting that high--figured 300 would make this thing really move [img]/ubbthreads/images/graemlins/rolleyes.gif[/img]. Guess I just need MORE power [img]/ubbthreads/images/graemlins/smokin.gif[/img].

Thanks for all the replies.

Steve