What year is used and does anyone have the diagram of the wiring. Also is the compass built in or does it require an outside sensor and where does the temp sensor go on the outside of the truck? Thanks
__________________
1997 F-250 CC, Short bed, 134,000 mi, 6" lift, 35" BFG A/T,Open Air element, H2E, Bean Stage II's, 3-5" Tymar DP and exhaust, Dead Cat, BTS Trans., Dana 60 Swap, 4:10 Gears.
__________________
95 F-250 LWB PSD 4X4 extended cab auto trans, 6-inch superlift with super runner steering, 37X13.5-17 Toyo - Open Country M/T tires and American Racing - Clash (Black)rims, TYMAR 3x4" DP, TYMAR 4" straight exhaust(lost the cat during install), coolant filter, 10K Mod, FPR shimmed, Gutted EBPV, Autometer Ultra Lite boost, pyro, & trans gauges in the A-pillar, 26K GVW transmission cooler, K&N FIPK, Warn manual hubs, 95 windstar dual electric fans, Viper Alarm with remote start.
I've got the temp sensor mounted below the headlight, behind the grill which seems to work just fine. The compass is self contained in the console. If you get a console, make sure you get one with the sensor and the harness. You can use the EVTM for the wiring (although the link to the full size Bronco site is helpful as well). Pic of my installation are in my signature (with a few more in my gallery). Cheers!
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
