How can I extend the fill tube, I installed a flatbed and now I need about 4-5 inches more to secure the fillers to the bed. I tried searching for the answer but had no luck. I could make fill doors on the top of the bed but that would be a PIA if I had a load and needed fuel.Thanks in Advance, Jim
__________________
1997 F-350 SRW Crew Cab 4x4,E4od,4:10,Flatbed,Turbo Brake,Gooseneck Hitch, Banks 3" Downpipe, gutless cat, no muff. Superchips 1705 tuner, ARE air filter, Banks Gauges and pillar pod, Hadley air Horns, Lund visor
'96 F-250 Utility Body 351M
Yeah, I have welders. What is the smaller diameter tube inside the larger hose? Does go all the thru the steel tube? With all the things I have done on my trucks I have never had one these off/apart. Thanks again, Jim
__________________
1997 F-350 SRW Crew Cab 4x4,E4od,4:10,Flatbed,Turbo Brake,Gooseneck Hitch, Banks 3" Downpipe, gutless cat, no muff. Superchips 1705 tuner, ARE air filter, Banks Gauges and pillar pod, Hadley air Horns, Lund visor
'96 F-250 Utility Body 351M
That is the feeble attempt at a vent on these trucks. Ever realized how 15 vehicles fillup while you wait for one tank to fillup? Lookup Dzljim's website if interested in the fast fillup mod to delete that hose you talk about and put a real vent system in the tanks so You can fill up faster. I did it WOW.
__________________
1997 PSD 3/4 ton 4x4 SC LWB SRW; 5 spd; 3:55; K&N open element/homemade intake; gutted EBPV piston, plugged hole; 3 in. downpipe; SCMT 1705; shimmed to 70 psi; 120,000; TTB DiPricol 0-60 white face boost gauge, DiPricol 0-1600 white face pyrometer, SOLD in between gauges for now; A-Pillar mount for now. DIY 160cc Injectors.DIY IDM mod. ValAir O-FE w/3400# plate; Front and rear tank filler neck mods
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
DiPricol 0-60 white face boost gauge, DiPricol 0-1600 white face pyrometer, SOLD in between gauges for now; A-Pillar mount for now. DIY 160cc Injectors.DIY IDM mod. ValAir O-FE w/3400# plate; Front and rear tank filler neck mods
Linear Mode
