idm mod ? - Diesel Forum

95powerstroker · 10-27-2009, 09:48 PM

is the idm mod worth doing

powerstrokin1997 · 10-28-2009, 12:30 AM

it is definitely worth it. best bang for the buck mod ive done only cost me $1.50 for the resistor

95powerstroker · 10-28-2009, 12:35 AM

did you do it your self can you walk me there it. i didnt really understand it on any pages i found

302man · 10-28-2009, 08:51 PM

Good stuff here : IDM mod for powerstrokes. - Fourdoorbronco forums

Rtxcoon · 10-28-2009, 08:56 PM

its worth it

its fairly easy to do if your comfortable with a soldering iron

MX_STROKER · 10-28-2009, 09:33 PM

To thouse that have made the IDM mod, did it change anything about the motor sound? : same, louder, quieter?.

drwoodchopper · 10-29-2009, 08:27 PM

I didn't notice anything as far as noise. All it essentially does is opens the injector faster and sooner so it is open longer.

MX_STROKER · 10-30-2009, 02:16 PM

Quote:

Originally Posted by drwoodchopper

I didn't notice anything as far as noise. All it essentially does is opens the injector faster and sooner so it is open longer.

OK, thank you for your answer.

matsh · 11-16-2009, 03:36 PM

the ressistor it sais that i nead a 1/2 watt type. i can only find one that is 0.6w rest of spec is right. 75.0k ohm metal film and 1% tollerance.

anybodu know if the 0.6w type will work?

MAILMANWV · 11-22-2009, 10:39 PM

can this mod be done even if you have a tuner installed already?

BadDogPSD · 11-23-2009, 02:14 PM

Quote:

Originally Posted by MAILMANWV

can this mod be done even if you have a tuner installed already?

Yes, it'll work fine with a tuner.

BadDogPSD · 11-23-2009, 02:15 PM

Quote:

Originally Posted by matsh

the ressistor it sais that i nead a 1/2 watt type. i can only find one that is 0.6w rest of spec is right. 75.0k ohm metal film and 1% tollerance.

anybodu know if the 0.6w type will work?

Should work. I've heard of buys using 1 watt resistors for this mod.

MAILMANWV · 11-24-2009, 08:32 PM

there is another mod done with a resistor.... it involves a plug near the fuel pressure schrader valve... can somebody post the link or direct me to what it does and how to do it.. thanks

MX_STROKER · 11-24-2009, 09:02 PM

Quote:

Originally Posted by MAILMANWV

there is another mod done with a resistor.... it involves a plug near the fuel pressure schrader valve... can somebody post the link or direct me to what it does and how to do it.. thanks

Maybe you are refering to the 10K mod, it has several variants, and also is known as ICP mod because the ICP is the sensor that is involved in it.

Patrick Feeley · 11-24-2009, 10:16 PM

Quote:

Originally Posted by MAILMANWV

there is another mod done with a resistor.... it involves a plug near the fuel pressure schrader valve... can somebody post the link or direct me to what it does and how to do it.. thanks

Go to "Steve Baz's Page" here on this site and scroll down to "10k Resistor Mod". It will refer to the ICP as IPS but they are the same. Cheers!