Does anyone know the make and part number for the sending unit/sensor we use for the Isspro transmission temperature gauge?
It's the sending unit that fits in the port just above the transmission pan on the drivers side.
I'd like to get one locally if I can, as I need it fairly quickly.
Thanks!
Dale
__________________
IDM mod
TYMAR intake
Amsoil dual by-pass
Precision Ind triple disk Torque Convertor & Pro build tranny
Transgo Tugger shift kit
Ford AIC & full gauges
Mini-Me/SWAMP 250cc Hybrid 530 injectors
17° HPOP
5" custom exhaust
Superduty Intercooler & GTS pipe kit
CCV mod
TS 4 position Flip Chip
Is this for the EV series of gauges? If so, we do not sell the sending unit separately. The gauge, amplifier box, and sending unit are all calibrated as a set to ensure that the gauge meets the specified tolerances. We used to have a stock of sending units which were right at the nominal value, and could therefore me substituted for any unit in the field. Try calling 800-888-8065 and ask for Aftermarket sales.
Regards,
Michael Pliska
__________________
ISSPRO Engineering Manager
1995 F350 PSD Crew Cab Dually, 255k miles (Ford rebuilt E4OD at 226k)
ISSPRO Prototype Performax gauges, Tymar Intake, Gutted EBPV, Tymar 3x4" downpipe, Tymar 5" exhaust, Cat's hiding in the shed, Edge Evolution on "Tow", Tricumulator springs and Accumulator Valve, Tru-Cool 4590 Trans Cooler, Lock-Right Locker
1998 S&S 9.5' slide-in camper
33' enclosed tag trailer with 2 doorslammer drag cars (73 Vega Super-Gas & 74 Vega ET Super-Pro)
1992 GMC Typhoon, 1973 Chevy Blazer with Pontiac 400, 1973 Trans-Am 455
NRA member and certified firearms instructor
GOA member
IDPA member
Is this for the EV series of gauges? If so, we do not sell the sending unit separately. The gauge, amplifier box, and sending unit are all calibrated as a set to ensure that the gauge meets the specified tolerances. We used to have a stock of sending units which were right at the nominal value, and could therefore me substituted for any unit in the field. Try calling 800-888-8065 and ask for Aftermarket sales.
Regards,
Michael Pliska
My gauge, as far as I know...has no amplifier box. Just the sending unit...and gauge is all there is! Oh...and of course the light that lights up the gauge at night.
Black gauges with an orange colored pointer.
Dale
__________________
IDM mod
TYMAR intake
Amsoil dual by-pass
Precision Ind triple disk Torque Convertor & Pro build tranny
Transgo Tugger shift kit
Ford AIC & full gauges
Mini-Me/SWAMP 250cc Hybrid 530 injectors
17° HPOP
5" custom exhaust
Superduty Intercooler & GTS pipe kit
CCV mod
TS 4 position Flip Chip
Dale, go to BBY ALLTRUCK across the street from my shop, Jim works out of the back of the shop and sells Isspro gauges.
Craig
__________________
1997 F250 FireTruck Red,CC SB,auto( Prescion TC, HD-2Tugger),5" exhaust, custom Swamp 195cc Hybrid injectors, TWildman 4-pos chip,open air cleaner, I/C w Banks intake, 225,000km,AIC,dual electric fans,Sky mfg RSK w/ D60w/ARB locker,Ramsey 15k# winch, BFG/AT 315's, F450 rear springs, home of Craig's Performance Diesel pictures
" lying is a cheap way out of reality, the real cost is the loss of respect and trust"
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
