Hello again. Haven't been here much lately. Haven't really had time to mess with my truck at all. I'm trying to narrow down an oil leak issue. I've read and understand the function of the CDR Valve. Someone posted the location in reference to a non-turbo truck but where is it on a turbo truck? Do I just replace it or test it first? If test then how?
__________________
'94 F350 XLT Dually
7.3 TIDI/E4OD w/ 206K
stock but not 4 long [img]/ubbthreads/images/graemlins/wink.gif[/img]
3/31/07 re-done GP system
4/15/07 New Brake System!
8/17/07 ATS Exhaust System (cheap)
Okay I've decided to just replace this as mine looks original. Anyone have a good place to get one? I've looked on-line at the usual places AutoZone, Advance Auto and I don't see anything listed.
__________________
'94 F350 XLT Dually
7.3 TIDI/E4OD w/ 206K
stock but not 4 long [img]/ubbthreads/images/graemlins/wink.gif[/img]
3/31/07 re-done GP system
4/15/07 New Brake System!
8/17/07 ATS Exhaust System (cheap)
At Ford. [img]/ubbthreads/images/graemlins/smokin.gif[/img]
__________________
David and his Ford truck with a little motor and a big idea......
Ford F-350 Dually Crew Cab 5-Sp 7.3 IDI Centurion Conversion. No mods, rebilt IP and replaced injectors. Used as personal driver and pulling my RV camper.
Planned upgrades are a new and better turbo and larger exhaust pipes than the 21/2s that are already under the rig/ would like a 6 spd tranny but dont know if that is a feasable or smart investment yet.
1993 Dodge 3/4 ton Van Conversion 318CI
1978 Dodge Magnum XE T-top Classic 4BBl 400CI (Honeymoon Car)
1965 Dodge Polara 4 DR 383CI
Ford calls this item a "Adapter assembly for Crankcase Ventilation" Part number E3TZ-6A665-A
The part # for the rubber tube on the CDR... Retainer # E8TZ 6A892A
IH part CDR #1805319C1 "cheapest"
__________________ http://photos.thedieselstop.com/show...0/ppuser/28329
93 F250 7.3 IDI S/C XLT 4X4 E40D 3.55LS, Captains chairs, Tutone Mocha, Leer 48" Hiboy cap, FR & RR hitches, full DeeZee running boards. Factory ordered/delivered Jan 93 has 160K+, it's basically a stock truck with all the Ford options, just no disc player.
Toys: 26'Jayco FK TT, 18'Sylvan Pro Fish.
Bringing this back up. I have a new CDR valve ford part number E3TZ6A665A and gasket E3TZ6A892A (both numbers posted above) in front of me.
The so-called gasket above is more or less an o ring with a square cross section. There is another rubber piece, a grommet that fits into the valve cover and into that goes the longer leg on the CDR valve. Does anyone know that part number? thanks.
__________________
93 F250 Supercab 4x4, 7.3 IDI Factory Turbo owned since 1997, 5 speed, 130k miles Jan. 2008.
__________________ http://photos.thedieselstop.com/show...0/ppuser/28329
93 F250 7.3 IDI S/C XLT 4X4 E40D 3.55LS, Captains chairs, Tutone Mocha, Leer 48" Hiboy cap, FR & RR hitches, full DeeZee running boards. Factory ordered/delivered Jan 93 has 160K+, it's basically a stock truck with all the Ford options, just no disc player.
Toys: 26'Jayco FK TT, 18'Sylvan Pro Fish.
Proud Canadian BOOB man too!!
Last edited by cdnsarguy : 02-09-2008 at 02:56 PM.
You may have to go to your Ford dealer and get them to look for the part from a schematic.....
__________________ http://photos.thedieselstop.com/show...0/ppuser/28329
93 F250 7.3 IDI S/C XLT 4X4 E40D 3.55LS, Captains chairs, Tutone Mocha, Leer 48" Hiboy cap, FR & RR hitches, full DeeZee running boards. Factory ordered/delivered Jan 93 has 160K+, it's basically a stock truck with all the Ford options, just no disc player.
Toys: 26'Jayco FK TT, 18'Sylvan Pro Fish.
According to my local dealer, the part number for the grommet or "retainer crankcase valve" that goes between the CDR and the valve cover is f3tz6a892-a.
However, it is listed as discontinued at a local dealer as of 2004. Unless I find one in stock at another local dealer I will go to International to get it.
Edited to say that I think I was given a wrong part number for the above from the dealer. This site may have the correct part number in the list Ford diesel 6.9 7.3 IDI
Instead of even bothering with Ford or International I ordered Mercruiser Part number 25-808256. It was less than $10. Mercruiser used this engine in some boats for awhile. I will let you all know when I get it in my hands and verify it is the correct part. I ordered it from Stem To Stern Boat Works
__________________
93 F250 Supercab 4x4, 7.3 IDI Factory Turbo owned since 1997, 5 speed, 130k miles Jan. 2008.
Last edited by rustnrot : 02-14-2008 at 12:32 PM.
Reason: wrong part number posted
AutoForums.com is the premier network of enthusiast-owned
enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share
experiences and opinions as a community.
Linear Mode
