Thermostat Replacement - Diesel Forum

Snotzalot · 08-29-2007, 04:43 PM

While doing the vacuum pump I replaced the thermostat. As we all know it can be tricky to get the thermostat and gasket to stay in position while installing. One of the guys recommended a bit of gasket cement to hold the thermostat. I've got another idea. The thermostat can helded securely into the block using a bit of 5 Minute Epoxy as well as securing the gasket to the goose neck.

icanfixall · 08-30-2007, 02:27 AM

I like using yellow 3M weatherstrip cement. It hold fine for me. Comes off easy too.

rollfj · 08-30-2007, 06:15 PM

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: icanfixall</div><div class="ubbcode-body">I like using yellow 3M weatherstrip cement. It hold fine for me. Comes off easy too. </div></div>

I agree. I was introduced to this idea while working for a small automotive shop. It works great for water pump gaskets as well. Haven't had any leaks since I started using this.