6 pin trailer end

[mturner]

My dad has a 2000 Sooner Stock trailer that had the 6 pin pulled out (He let a guy borrow it). I looked on Sooner's site and found the diagram for the trailers for a 7 pin, it is as follows:

BRN-Clearance tail lights
Yel-Left Turn
WHT-Ground
Red-Dome Light switch (Center Pin)
Blue-Backup
GRN-Right Turn
Hot Black

My question is, to wire this to a 6 pin which is what it has had for years, which wire do I not use?

[Partsman]

[ QUOTE ]
My dad has a 2000 Sooner Stock trailer that had the 6 pin pulled out (He let a guy borrow it). I looked on Sooner's site and found the diagram for the trailers for a 7 pin, it is as follows:

BRN-Clearance tail lights============OK
Yel-Left Turn========================OK
WHT-Ground===========================OK
Red-Dome Light switch (Center Pin)===Normally not used but could be
Blue-Backup===========================ON a 6way is brakes
GRN-Right Turn========================OK
Hot Black=============================No places left on a 6way

My question is, to wire this to a 6 pin which is what it has had for years, which wire do I not use?

[/ QUOTE ]

[drcampbell]

There's a good reference page at
http://www.etrailer.com/faq/wiring.asp

[j_apetersen]

If you hook the red dome light to the trailer clearence light then you dont need the red in the center pin and it is used for the other wire that goes in the center of the 6 pin.But you will need to turn on the lights to work the dome light.