6.4L Power Stroke Engine and DrivetrainDiscussion of the 6.4L Power Stroke diesel engine and drivetrain in the 2008 Super-Duty trucks. No gas engine discussion allowed except on transmissions and drivetrain that pertain to all models. Please confine discussion of topics in this forum to those items that are specific to the 6.4L Power Stroke engine.
__________________
'99.5PrairieTan/XLT/4x4/CC/SWB/7.3 <u>PARTS FROM DI:</u>6 pos Chip, MM inj., Custom DIIC, AFE2, Fass 150/180, Garrett GTP38r, Full fuel system w/ Billet sump and reg. return, HX mod, Built tranny w/ PI TQ. Conv., 4 pod w/ Autometers, Centric slotted rotors/pads
It looks like 10 pound of s*** in a 8 pound bag. Not much room in that engine bay.
__________________
2000 F-450 PSD, Auto 19.5' Flatbed Wrecker
Mods: PTO Mounted on trans and Trans Gauge, 6.0 Cooler, and Dieselsite Trans Filter Kit
2002 F-450 PSD, Auto WheelLift
Mods: Banks Exhaust, Triple Gauge pod Autometer Ultra-lite (Boost Pryo Trans Temp), FactoryTech Valvebody, Dieselsite Trans Filter Kit
2003 F-550 PSD 7.3, Auto WheelLift
Mods: DiPricol Guages (Boost Pryo Trans Temp, DP Chip (Stock, 40 Tow, 80 Econo), BTS Valvebody, Dieselsite Trans Filter Kit, 6.0 cooler, 4" MagnaFlow XL Exhaust Customized to fit infront of the axle with a 6 inch tip
2004 F-650 Supercab Black Flatbed Cat 7.2 Straight 6 with an Allison Auto
__________________
'99.5PrairieTan/XLT/4x4/CC/SWB/7.3 <u>PARTS FROM DI:</u>6 pos Chip, MM inj., Custom DIIC, AFE2, Fass 150/180, Garrett GTP38r, Full fuel system w/ Billet sump and reg. return, HX mod, Built tranny w/ PI TQ. Conv., 4 pod w/ Autometers, Centric slotted rotors/pads
I would hate to be a diesel tech. How do you guys do it!?
__________________
2007 F350 White King Ranch Crew Cab 4x4
7" EDGE 4 Link Suspension, Fox Remote Reservoir Racing Shocks all the way around with Duals up Front, and Dual Steering Stabilizer. 37" Toyo MT's on 20" wheels.
Fully polished MBRP T304 turbo back exhaust finshed off with a 6" x 18" tip from ITP Diesel...Thanks Dennis!
Future mods, DePricol White Faced Gauges and a 24 volt inverter and power supply mounted in the bed,
__________________
'99.5PrairieTan/XLT/4x4/CC/SWB/7.3 <u>PARTS FROM DI:</u>6 pos Chip, MM inj., Custom DIIC, AFE2, Fass 150/180, Garrett GTP38r, Full fuel system w/ Billet sump and reg. return, HX mod, Built tranny w/ PI TQ. Conv., 4 pod w/ Autometers, Centric slotted rotors/pads
lol. Yup hack it while the motor is out for studs. [img]/ubbthreads/images/graemlins/cool.gif[/img]
__________________
'99.5PrairieTan/XLT/4x4/CC/SWB/7.3 <u>PARTS FROM DI:</u>6 pos Chip, MM inj., Custom DIIC, AFE2, Fass 150/180, Garrett GTP38r, Full fuel system w/ Billet sump and reg. return, HX mod, Built tranny w/ PI TQ. Conv., 4 pod w/ Autometers, Centric slotted rotors/pads