20X10 doable on a stock height

[dirteeboy808]

4X4 F350SD

What tires would be the best, if so?

or would a leveling kit or higher be needed..thanks ahead

[Harley350]

20 by 10 is not enough information. Which size tires will you be using?

Here's what My bud uses on his stock F250 2008--- Fronts rub during a tight turn but only alittle. A level kit would prevent any rubbing

35x12.50R20 Section Width:--Section Width:12.51 in318 mm
Rim Diameter:--Rim Diameter:20 in508 mm
Overall Diameter:35.02 in889.50 mm
Sidewall Height:--Sidewall Height:7.51 in190.75 mm
Radius:--Radius:17.51 in444.75 mm
Circumference:--Circumference:110.0 in2794 mmRevs per Mile:-Revs per Mile:593.9

[dirteeboy808]

Originally Posted by Harley350

20 by 10 is not enough information. Which size tires will you be using?

Here's what My bud uses on his stock F250 2008--- Fronts rub during a tight turn but only alittle. A level kit would prevent any rubbing

35x12.50R20 Section Width:--Section Width:12.51 in318 mm
Rim Diameter:--Rim Diameter:20 in508 mm
Overall Diameter:35.02 in889.50 mm
Sidewall Height:--Sidewall Height:7.51 in190.75 mm
Radius:--Radius:17.51 in444.75 mm
Circumference:--Circumference:110.0 in2794 mmRevs per Mile:-Revs per Mile:593.9

sorry about that it was late and I was pretty delirious...

So with the leveling kit 12.5 is widest width for the tire without rubbing..if I run a 20x10 wouldn't it stretch the tire a little allowing more clearance?

[Stymie]

a 10 inch rim is what you are supposed to run with 12.5's or at least a 9"

[dirteeboy808]

since everyone are running 9", does anyone know if the 10" with a -13 offset create a problem with clearance or should it help it since it's pushed out a little further

sorry for all the questions, new to going up, used to to going down......