Ford Diesel Forum / Powerstroke Forum Ford Diesel Forum / Powerstroke Forum
   
Go Back   Diesel Forum - The Diesel Stop.com > 2008-Up Super Duties > '08-Up Upgrades and Aftermarket
Register Home Forum Active Topics Gallery Search Today's Posts Mark Forums Read

'08-Up Upgrades and Aftermarket Upgrading and adding aftermarket equipment to your 2008-Up Super Duty.

       
Reply
 
LinkBack Thread Tools Display Modes
Old 07-20-2008, 08:17 AM   #1 (permalink)
Junior Member
 
FordNewbie's Avatar
 
Join Date: Mar 2008
Posts: 29
iTrader: (0)
My Photos: (0)
Monitor only with EGT

I have been researching performance monitors for my 08 6.4 PS. One of my priorities is EGT and it is not clear to me if the 6.4 already has this data on the OBD II port or if I will have to install the thermocouple. If the thermocouple is required, is there any chance that there is already a port or is drilling and tapping required?

I like what I have seen in the MSD DashHawk, the Edge Insight, and the Quadzilla Commander. At this point, I do not have the budget or nerve to start reprogramming/modifying this motor so I am not planning to do a programmer. However, I have to ask, am I reading it right that the Edge Insight is ~ $300 and the Edge Evolution programmer (and monitor) is ~$480? Balls or not, that sure makes it hard not to buy the whole set-up at the start.

Finally, I have seen pictures of the Edge and MSD installed in a very clean mounting pod above the dash vent. Where can I get this?

Thanks in advance. I normally manage to answer my many questions by reading the forum. I failed this time.

Lee
__________________
08 F250 CC SWB 6.4L PSD
Towing 09 Sierra 335QBQ (38' 12K 5er)
Precious cargo, 3 littles ones aged 1, 3 and 6 years old
FordNewbie is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Advertisement
 
Old 07-21-2008, 10:50 AM   #2 (permalink)
Member
 
Join Date: Jun 2005
Location: Aurora, ON
Posts: 97
iTrader: (0)
My Photos: (0)
The Edge Insight shows EGT's and regens with no extra hookups, just plug her in and go. It's great gauge!
__________________
2008 F350 PSD XLT S/Cab 4x4 SRW L/B Job 2
2006 FR 29RLBS Wildcat
DXprowler is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-22-2008, 10:06 AM   #3 (permalink)
Senior Member
 
taboky's Avatar
 
Join Date: Mar 2004
Location: Nashua, NH
Posts: 275
iTrader: (0)
My Photos: (3)
Yes, the Insight reads the factory EGT, all 4 actually. Plus lots of other stuff. I got my Insight and pod here Edge Products Insight Monitoring Gauge System - 83400 . They were the cheapest at the time (probably still are) and quick shipping. 5 minute install.

As you can see in pic, I am looking at EGT, Tranny Temp, Coolant temp and Engine oil temp.

__________________
'08 F350 Lariat DRW CC LB Job 3 Black/Silver
towing a '07 Raptor 3712TS toyhauler
with a '02 Kawasaki Nomad Dresser in the garage
taboky is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-22-2008, 07:09 PM   #4 (permalink)
Junior Member
 
FordNewbie's Avatar
 
Join Date: Mar 2008
Posts: 29
iTrader: (0)
My Photos: (0)
Thanks for the reply and picture. I ordered mine yesterday from Bill.

Lee
__________________
08 F250 CC SWB 6.4L PSD
Towing 09 Sierra 335QBQ (38' 12K 5er)
Precious cargo, 3 littles ones aged 1, 3 and 6 years old
FordNewbie is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-25-2008, 12:08 PM   #5 (permalink)
Member
 
Juzplanekrazy's Avatar
 
Join Date: Apr 2008
Location: Temple City Ca.
Posts: 42
iTrader: (0)
My Photos: (0)
Taboky, You sold me with that closeup picture. I'm ordering one today.
__________________
Juzplanekrazy is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-28-2008, 01:28 PM   #6 (permalink)
Member
 
Juzplanekrazy's Avatar
 
Join Date: Apr 2008
Location: Temple City Ca.
Posts: 42
iTrader: (0)
My Photos: (0)
For what it's worth.......I picked up my Edge Insight and Dash POD from a guy on ebay. 279.99Insight and 40.00 for POD free shipping on Insight 5.00 for POD. 324.00 +/- for the whole setup. Can't wait to get it installed.
__________________

Last edited by Juzplanekrazy : 07-28-2008 at 01:36 PM.
Juzplanekrazy is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-28-2008, 10:42 PM   #7 (permalink)
 
Join Date: Dec 2007
Location: Tx, USA
Posts: 363
iTrader: (0)
My Photos: (0)
Watch for anyone selling below the 299 price, you may not get warranty from Edge if something goes wrong. Price is set at 299.
__________________
dfuser diesel performance
SCT Custom Tunes. Dare to Compare!
Call us @ 512-750-7102 Just about anytime!

Last edited by dfuser : 07-28-2008 at 10:44 PM.
dfuser is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-29-2008, 12:35 PM   #8 (permalink)
Member
 
Juzplanekrazy's Avatar
 
Join Date: Apr 2008
Location: Temple City Ca.
Posts: 42
iTrader: (0)
My Photos: (0)
Ebay

I totally understand dfuser. I've been very lucky with all my EBAY purchase's. I've bought and sold over 1500 items off EBAY. There are several sellers that do not sell items with warrantys so a guy does need to watch for that.
This particular seller has over 2000 sells on EBAY and all feedback has been good. And this item does come with a EDGE warranty.
Just a little info for the guys out there, looking a little deeper on the net might save you some money. You can't always count out Ebay.
__________________

Last edited by Juzplanekrazy : 07-29-2008 at 12:38 PM.
Juzplanekrazy is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-30-2008, 05:39 AM   #9 (permalink)
Member
 
Juzplanekrazy's Avatar
 
Join Date: Apr 2008
Location: Temple City Ca.
Posts: 42
iTrader: (0)
My Photos: (0)
Ebay

Well I got my Edge Insight. Full warranty, packaged great, and it came it 2 days. Now to install it tomorrow. Great bargain, saved over $25.00 from the local sellers here.


__________________
Juzplanekrazy is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-30-2008, 08:18 PM   #10 (permalink)
Senior Member
 
Stalwart's Avatar
 
Join Date: Mar 2007
Location: Redmond, WA
Posts: 160
iTrader: (0)
My Photos: (0)
Me too. Damn they are fast getting those things out!
Stalwart is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 08-05-2008, 10:56 PM   #11 (permalink)
Member
 
Join Date: May 2008
Location: Ft. Collins, CO
Posts: 35
iTrader: (0)
My Photos: (6)
I installed the Bully Dog PMT and it will read all the sensors from the factory through the OBDII port. It is a very attractive color touch screen with guages and you can contol the transmission shift points from Stock, Smooth, Agressive. I love it...and the power increase is amazing on "Extreme" setting. Very happy with the product.
scottiet61 is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Diesel Forum - The Diesel Stop.com > 2008-Up Super Duties > '08-Up Upgrades and Aftermarket



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

» Search Used Trucks
Search for used vehicles by ZIP, please enter Zipcode below:
Google Links

» Log in
User Name:

Password:

Not a member yet?
Register Now!
» Wheel & Tire Center


Sponsors

» Auto Resources
Locate Ford Dealerships to find a new Ford for sale, Ford Mustang and other car models such as the Ford Escape.
Powered by vBadvanced CMPS v3.0 RC2

All times are GMT -5. The time now is 11:02 AM.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0
  • AutoForums.com
  • Truck
  • European
  • Import
  • Domestic
  • Manufacturer

AutoForums.com is the premier network of enthusiast-owned enthusiast-operated automotive communities.
We operate more than 100 automotive forums where our users consult peers for shopping information and advice, and share experiences and opinions as a community.

Visit AutoForums.com today.

For advertising information, please visit our AutoForums.com website and Contact Us, or send an email message to sales@autoforums.com.