The Diesel Stop banner

Machine Shop recommendation Eugene OR

895 views 0 replies 1 participant last post by  bwalker5 
#1 ·
Anyone know of a knowledgeable 6.0l head surfacing shop in or around Eugene OR?

I have the drivers side head off already and found that the gasket was leaking on the second cylinder back... lots of carbon built up on both the head and the block at the top water jacket. The blue "witness" outline from the gaskets was missing on both surfaces.. all the other cylinders had the outlines.
This was a really slow leak so I'm hoping the heads can be salvaged... Truck has never overheated so my fingers are crossed...
Heading back out to do the passenger side.. UGGH....
Blake
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top