Diesel Forum - TheDieselStop.com - sd73man44's Album: My 99 7.3l SD (look at my album pictures)
 
My 99 7.3l SD (look at my album pictures)
1999 FORD F250 SUPER DUTY 7.3L DIESEL 6 speed manual (hover curser over picture or dble click pic for more details, explanations, and information)
This is what happened to my cord when it shorted and caught fire. Heavy silicone saved the vehicle. This encapsulated silicone end is thick, 1/4"...
OEM block heater cord (end that attaches to heater element) at left side of engine.  This heavy 8" silicone covered end plugs into element.
Ten essential tools/items............   
Short piece wire, fuses, a roll duct tape, vise grips, screwdrivers, gallon water, real lug wrench, first...
Yeah!  She loves it.
ZF transmission F250SD 4X4 view from rear w/o transfer case. After trans is installed and bolted up in vehicle the transfer case is brought into...
Another diesel guy had purchased one nearly  identical but had an orange label,  didn't work.  Mine has blue label and it works for me. Color has no...
This is an example of a guage dashboard that displays on a Android radio or smartphone using Bluetooth and an app named Torque Pro.  Many options...
White arm/red stripe mod. 
Clutch arm '99 SD 7.3l diesel with manual transmission.  
If you hear and feel snap, crackle, and popping noise while...
Needed components: 
1. bronze thrust washer 
2. OEM clutch push rod 
3. bronze bushing (sized to length required) 
4. bronze (thin) thrust washer 
5....
Clutch arm pin after removal from arm. Note wear on tip. 
Caused by disinegration of plastic bushing and steel on steel wear of tip.  OEM bushing...
This is the plastic OEM clutch rod bushing and the steel pin that it attaches to on the clutch pedal arm. The bushing also retains the clutch rod in...
Shoulder bolt in place on clutch pedal arm  after welding before paint. Red stripe/white arm mod.
Clutch rod assembly shown in place on arm for clarity. Picture simulates view seen under dash looking up from driver floor.  
When the nut is torqued...
Problem: Unable to shift ZF manual transmission due to slop in clutch rod, worn out plastic bushing and worn steel pin on clutch arm.  
FIXED by...
Vss profile view. Of course you need to clean dirt and crud away before removal from axle housing. My truck has an M8 bolt with 13mm hex.  Using same...
Oem vss with metal body on left,  plastic body on right.  Part located on rear axle hsg.
'99 7.3l  VSS oem on left andreplacement (Airtex)  replacement on right.
Ford 7 pin Hitch plug (truck and trailer)
IMAG1154 driver side  rear caliper ahead of axle(bleeder on bottom - wrong)  
Parts were mixed from auto parts store - correct part # on box  but...
Passenger side rear caliper-behind axle(bleeder on top-correct).
Truck plug (7 pin)
"Motor Home"
Osprey with Large Mouth Bass, Standish Pond
Problem: loss of 6th gear at 160k. Final solution: replace Transmission. Dealer was not much help. Wanted to sell me a new truck. Did my homework,...
clutch fork (revised heavy duty design) 
YC3Z-7515-BB lever assembly 
If you have an early truck with the ZF S6-650 trans 
and you are doing any...
 
 
For the best viewing experience please update your browser to Google Chrome