Diesel Forum - TheDieselStop.com - Search Results
Advanced Search
Showing results 1 to 25 of 264
Search took 0.04 seconds.
Search: Posts Made By: bgiebels
Forum: 6.0L Power Stroke Engine and Drivetrain   04-28-2019, 08:15 AM
Replies: 55
Views: 2,034
Posted By bgiebels
Well everyone, I welded a bolt to the remains of...

Well everyone, I welded a bolt to the remains of the ICP, on my old rail, and got it out. I then replaced the "new-used" rail with the original one (didn't mess with the ball tubes) and after...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-19-2019, 05:55 PM
Replies: 55
Views: 2,034
Posted By bgiebels
I have the parts to "re-re" seal the injector, it...

I have the parts to "re-re" seal the injector, it certainly isn't going to hurt anything. I'll do a better job of lubing the ball tubes up when installing the rail. I did notice that the rail...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-18-2019, 12:17 PM
Replies: 55
Views: 2,034
Posted By bgiebels
I've already put new orings on all of the (1, 3,...

I've already put new orings on all of the (1, 3, 5, 7) injectors. The injectors on the other side are all new.

Are you saying to "re"-re-oring the injector?

I think I'm going to move the...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-18-2019, 12:14 PM
Replies: 55
Views: 2,034
Posted By bgiebels
Yep, I have already replaced those (Ball Tube &...

Yep, I have already replaced those (Ball Tube & Orings). Thanks though,
Forum: 6.0L Power Stroke Engine and Drivetrain   04-17-2019, 12:39 PM
Replies: 55
Views: 2,034
Posted By bgiebels
I can certainly do the gauge with the air line...

I can certainly do the gauge with the air line and shut off valve but I can "hear" an air leak under the rail around injector #3 (2nd from the front on passenger side). I pinpointed it in that area...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-17-2019, 12:31 PM
Replies: 55
Views: 2,034
Posted By bgiebels
Sorry I've been so thick headed. LOL So...

Sorry I've been so thick headed. LOL

So I've replaced the following:
- Ball Tube Replace with New O-Rings
- All 3 seals and copper compression ring on all Injectors on Passenger Side
- All 4...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-16-2019, 05:13 PM
Replies: 55
Views: 2,034
Posted By bgiebels
Small Update: I cleaned up my oil mess from...

Small Update:

I cleaned up my oil mess from last night and replaced the oil that had spilled out. I primed the system and the truck started after 10-15 seconds. While I wasn't impressed with...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-15-2019, 08:06 PM
Replies: 55
Views: 2,034
Posted By bgiebels
Agreed. I was incorrectly using rails instead of...

Agreed. I was incorrectly using rails instead of all the parts on the rails (i.e. Injector Cups, Dummy Plugs, Stand Pipe) or one of the permanent plugs that are in the rail.


Having said that......
Forum: 6.0L Power Stroke Engine and Drivetrain   04-15-2019, 09:25 AM
Replies: 55
Views: 2,034
Posted By bgiebels
Cool, I'm not getting any air, whatsoever, out...

Cool, I'm not getting any air, whatsoever, out of the oil filter reservoir.


Hopefully, I'll put this back together this evening, and it will start after I prime the High Pressure Oil system.
...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-14-2019, 05:03 PM
Replies: 55
Views: 2,034
Posted By bgiebels
I tend to agree with you.. (STC Fitting being the...

I tend to agree with you.. (STC Fitting being the cause of the injectors leaking). It really can't as the injectors are fed directly from the rail and it wouldn't matter if the stc fitting was bad...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-14-2019, 02:55 PM
Replies: 55
Views: 2,034
Posted By bgiebels
I removed the remaining injectors and changed the...

I removed the remaining injectors and changed the orings and the seals. I replace them all, torqued to 26ft/lbs, put the rail back in, torqued to 10ft/lbs... and there is still a leak around the 2nd...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-13-2019, 02:44 PM
Replies: 55
Views: 2,034
Posted By bgiebels
bismic, I am beginning to agree with you. I had...

bismic, I am beginning to agree with you. I had two sets of Stand Pipes and Dummy plugs, so I put the 2nd set in. Same thing happened and a leak was heard around the stand pipe. I put the old one...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-12-2019, 04:16 PM
Replies: 55
Views: 2,034
Posted By bgiebels
I took the rail out and torqued the Ball Tubes...

I took the rail out and torqued the Ball Tubes down to 100ft/lbs... it didn't really turn a lot to get from 70ft/lbs to 100ft/lbs maybe a 1/16th of an inch...


Regardless, in taking the oil rail...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-12-2019, 02:23 PM
Replies: 55
Views: 2,034
Posted By bgiebels
Hmmm, So I torqued the Ball Tube Retaining nuts...

Hmmm, So I torqued the Ball Tube Retaining nuts down to 70ft/lb but I just saw a couple of other posts indicating they should be torqued to 100ft/lb.... I guess I'm going to take the rail out and...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-12-2019, 01:35 PM
Replies: 55
Views: 2,034
Posted By bgiebels
Can you tell me if the following is accurate: ...

Can you tell me if the following is accurate:

Once you energize the IPR > 85% closed
If you hear air within both of the valve covers, the leak is on of the following (STC fitting, Injector Seal,...
Forum: 6.0L Power Stroke Engine and Drivetrain   04-12-2019, 08:16 AM
Replies: 55
Views: 2,034
Posted By bgiebels
Thanks Bismic, I'll get the seal kit and replace...

Thanks Bismic, I'll get the seal kit and replace it tonight to see how the air test performs again.

One other question. I'm assuming I should hear air until the IPR is closed, right?
Thanks,
Forum: 6.0L Power Stroke Engine and Drivetrain   04-11-2019, 06:27 PM
Replies: 55
Views: 2,034
Posted By bgiebels
Ok, what I finally decided to do was to buy an...

Ok, what I finally decided to do was to buy an Oil Rail and just replace it instead of trying to get the ICP out. I think now that I have the rail out, I can use a pair of pliers to get the ICP out...
Forum: 6.0L Power Stroke Engine and Drivetrain   03-18-2019, 12:44 PM
Replies: 55
Views: 2,034
Posted By bgiebels
That was my original concern as well. I wonder...

That was my original concern as well. I wonder if there is away to alleviate that concern? I imagine, when I try to get a hold of the plastic male part, it may break as well but I'm assuming the...
Forum: 6.0L Power Stroke Engine and Drivetrain   03-17-2019, 02:00 PM
Replies: 55
Views: 2,034
Posted By bgiebels
Actually, I don't think that will work... the...

Actually, I don't think that will work... the part that is still in, is the "male" part that would go into what the picture shows above, as the female part. Unless you're indicating I should somehow...
Forum: 6.0L Power Stroke Engine and Drivetrain   03-17-2019, 01:58 PM
Replies: 55
Views: 2,034
Posted By bgiebels
I think I'll give that a try Bob... Unless Bismic...

I think I'll give that a try Bob... Unless Bismic would come back and tell me "no way" for some reason. I was kinda thinking about that but didn't know if I could damage the rest of the sensor...
Forum: 6.0L Power Stroke Engine and Drivetrain   03-17-2019, 01:12 PM
Replies: 55
Views: 2,034
Posted By bgiebels
So I had surgery and haven't been able to work on...

So I had surgery and haven't been able to work on my truck... until today.

I go out, drag my air hose to my truck, get my extension cords laid out, go to take out the ICP to install the test...
Forum: 6.0L Power Stroke Engine and Drivetrain   03-10-2019, 08:25 PM
Replies: 55
Views: 2,034
Posted By bgiebels
But it is possible, I guess. and I'm assuming to...

But it is possible, I guess. and I'm assuming to repair the rail leaks is substantially cheaper than the ~800 to fix the HPOP.
Forum: 6.0L Power Stroke Engine and Drivetrain   03-10-2019, 08:23 PM
Replies: 55
Views: 2,034
Posted By bgiebels
I haven't pressure tested the HP rails. ...

I haven't pressure tested the HP rails.

This all started about 4 weeks ago when we hit -30 here in Iowa. I found the #6 injector was bad and I changed that and it started up an ran great. I...
Forum: 6.0L Power Stroke Engine and Drivetrain   03-10-2019, 07:38 PM
Replies: 55
Views: 2,034
Posted By bgiebels
I've already replaced the IPR. I will say the...

I've already replaced the IPR. I will say the old IPR didn't look like it was clogged or had any damage.
Forum: 6.0L Power Stroke Engine and Drivetrain   03-10-2019, 07:30 PM
Replies: 55
Views: 2,034
Posted By bgiebels
Yep, do have base oil pressure. Just not ICP.

Yep, do have base oil pressure. Just not ICP.
Showing results 1 to 25 of 264

 
Forum Jump
 
For the best viewing experience please update your browser to Google Chrome