The Diesel Stop banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. 99 & up 7.3L Power Stroke Engine & Drivetrain
    Hello all, I have a 2002 f250 7.3psd 4r100 cc lb 3.73 with stock tuning. I have been having issues with oil temperatures being higher than normal. unloaded it will run 208-213 at 70mph depending on ambient temp towing 7000lbs it ran as high as 223 at 70mph on flat ground. these numbers are...
  2. Power Strokes 1994-1997 General
    Hey y’all. New here and to everything trucks diesels and f250s. I’m in a spot where I’m dealing with a truck who has an oil leak, it’s a 1996 7.3 f250 power stroke with the turbo and all. The leak is at a rapid rate coming from somewhere more topside of the engine only when it’s turned on. It...
  3. 99 & up 7.3L Power Stroke Engine & Drivetrain
    I'm new to owning a 7.3L and have read all kinds of great info on this site but can't seem to find anything in the last 10 years about which oil and filter types (synthetic or conventional) or brands are best. There have been some upgrades over the last few years in oil and filter quality and I...
  4. Power Strokes 1994-1997 General
    Hey everyone, so I finally purchased my first 7.3 and couldn't be happier. I live in a cold area where snow is a guarantee. Since I have been driving my truck, I haven't noticed too many issues (I say that timidly) but I have began to notice the oil level on my dipstick. It concerns me because...
  5. 99 & up 7.3L Power Stroke Engine & Drivetrain
    Hi all, this is my first time on this site. I have a 2000 F350 7.3 and i changed the oil 2 weeks ago and i think i went over by about 1 quart. Today after i turned the truck off, i checked the dipstick and saw a few small bubbles. Mayne half an inch of bubbles tall. Im just wondering if i should...
  6. General Diesel
    I have a 04 5.9 and I tried to do an oil change today. After I was finished I started up the truck and it was pouring oil out of the filter. I lost about an gallon of oil in probably a minute, as soon as I started it up. What did I do wrong? I am thinking it might the filter that I bought?
  7. Where I work

    Where me and my fiance make our money. Best industry in the world.
  8. The pan

    This is pass side of pan. Note drip on line clamps in foreground. Also streaks on brackets
  9. The Underside Residue

    This taken from Pass side looking at the TQ cover
    oil
  10. Residue on Tubes

    This is to the left of the Y
  11. TBD's Connector with oil?

    Detail shot of the pass. side.
1-11 of 11 Results
Top