[boatdoc]

Just brought the 06 home and the question is where to put the guages? I took the under cubby 3 guage pod out of the 04 along with all the wiring knowing full well that it isn't going to happen in the 06 with the drivers side jocky box but now what?? I need the grab handle on the A piller to get my fat a$$ in the truck. I have looked at the venders but it doesn't look promising for a 3 guage set-up. I really miss my pyro and can live without the boost now that the dash has one that seems to work OK. As for the tranny temp, I never saw it go over 170 even pulling the 13000 pound 5er on the 04. Any suggestions or comments. Thanks

 

[ikaroback]

Go get the x monitor, it mounts on the a-pillar below the grab handle.

 

[QuadBoenker]

http://www.quadzillapower.com/commander/index.html

See if that fits your needs.


Quad

 

[tydaddy003]

why not get the overhead/over-the-mirror mount...i have just got one...its tight...TM

 

[jgoff78]

if this doesnt solve your problem i dont know what will http://www.itpdiesel.com/store.phpcrn=143&action=show&show_products_mode=cat_click

 

[Mark Craig]

boatdoc,

tydaddy003 is right the overhead mounts are getting very very popular. They are available in 2,3 and 4 gauge designs. Best part is they are totally out of the way and you can see them easily without taking your eyes off the road too!! If you have any questions on them or Auto Meter, Isspro or DiPricol gauges and accessories just call us and we'll be glad to help you.

Mark @ DPPI