[smoothsouthern84]

Put on new caliper and new bracket. Did not clean off and lube up pins and new stainless hardware. Just learned after reading several helpful post. Will pull back off in the morning and clean grease and reinstall it all. Tried the bleeding tricks turning wheel left right 5 times then press brake 3 times. Did about 50 sets keeping fluid topped off. Don't seem to be getting any fluid to the calipers. Power steering works like new. Just can't get brake petal to pump up.

 

[smoothsouthern84]

Well fixed all the above by putting on a new Master Cylinder. Seem to have brakes now. The petal don't go to the floor. Now the truck want crank up.