does it have any code? no rev up can be your fuel system or HPOP system. but if it run fine on street and not under load may be also the transmission??? not a 6.0 or transmission expert but that's my thought. Mark Kovalsky is a formal ford transmission tech, he might come across this and give is 2 cents on it
2004 F250 Problem - help please
Hi There,
A few years back I purchased a 2004 Ford Super Duty F-250 Diesel 6.0L Automatic (Vin 1FTNW21P94ED50795) which I took to Vanuatu.
It has been at the Ford dealership in Port Vila, Vanuatu for around six months at a cost of over 4000 USD and is no different to when it went in. They have replaced the fuel injection computer module, cleaned injectors, changed filters and serviced. To be honest I don't think they have any idea. This particular model is unknown in Vanuatu.
The problem is if against a kerb or rock or in a shallow hole at standstill it won't rev up or climb over. The engine loads up but won't rev. If the vehicle is pushed back or forward a few inches it will then take off and climb over. On road at speed it seems ok, it changes gears and kicks down as normal. It happens when cold and warmed up.
The opinion I get from mechanics here is that the problem may be in the solenoid operating the torque convertor or in the convertor itself. Also been suggested to replace all injectors.
This is too expensive for me to fix on an old truck. Does anyone have any other ideas on what maybe wrong with it?
thanks
Gus
A few years back I purchased a 2004 Ford Super Duty F-250 Diesel 6.0L Automatic (Vin 1FTNW21P94ED50795) which I took to Vanuatu.
It has been at the Ford dealership in Port Vila, Vanuatu for around six months at a cost of over 4000 USD and is no different to when it went in. They have replaced the fuel injection computer module, cleaned injectors, changed filters and serviced. To be honest I don't think they have any idea. This particular model is unknown in Vanuatu.
The problem is if against a kerb or rock or in a shallow hole at standstill it won't rev up or climb over. The engine loads up but won't rev. If the vehicle is pushed back or forward a few inches it will then take off and climb over. On road at speed it seems ok, it changes gears and kicks down as normal. It happens when cold and warmed up.
The opinion I get from mechanics here is that the problem may be in the solenoid operating the torque convertor or in the convertor itself. Also been suggested to replace all injectors.
This is too expensive for me to fix on an old truck. Does anyone have any other ideas on what maybe wrong with it?
thanks
Gus
1 - 2 of 7 Posts
First, I was never a transmission tech. I don't know where people get that idea from
My apologies....
Sent from AutoGuide.com Free App
1 - 2 of 7 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
The Diesel Stop
A forum community dedicated to all Ford Diesel owners and enthusiasts. Come join the discussion about PowerStrokes, performance, modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
Top Contributors this Month
View All
bugman
52 Replies
Big Horn
45 Replies
John in OkieLand
40 Replies
