[ QUOTE ]
My electronic shift 4x4 will not engage in low. When I turn the switch from 2 to 4-hi, I do so in neutral, and everything works fine. I then procede to turn the switch to 4-low, and the light comes on, but nobody is home. No forward or rearward motion, and a terrible grinding if I try to put it in park. If I switch back to 4-hi, the low range light will turn back off, it will "clunk" and I can move again.
Where should I start?
BTW: I was on a hill, with my foot on the brake. I even tried letting it roll to move the gears, but to no avail.
[/ QUOTE ]
I'd start by trying it again befor I even started trouble shooting. Leave the truck in drive or reverse when you shift it into 4wd high. Try to move the truck a little if you can while it's shifting. When in 4wd high, put your foot on the brakes, then put the truck in neutral and shift it into 4wd low. Put the truck back into drive or reverse, take your foot off the brakes and drive away. Try it that way before you go any further.
Joe
My electronic shift 4x4 will not engage in low. When I turn the switch from 2 to 4-hi, I do so in neutral, and everything works fine. I then procede to turn the switch to 4-low, and the light comes on, but nobody is home. No forward or rearward motion, and a terrible grinding if I try to put it in park. If I switch back to 4-hi, the low range light will turn back off, it will "clunk" and I can move again.
Where should I start?
BTW: I was on a hill, with my foot on the brake. I even tried letting it roll to move the gears, but to no avail.
[/ QUOTE ]
I'd start by trying it again befor I even started trouble shooting. Leave the truck in drive or reverse when you shift it into 4wd high. Try to move the truck a little if you can while it's shifting. When in 4wd high, put your foot on the brakes, then put the truck in neutral and shift it into 4wd low. Put the truck back into drive or reverse, take your foot off the brakes and drive away. Try it that way before you go any further.
Joe
