Putting the rear end way up in the air also makes it a lot easier to move around. I use a pair of 12ton stands from Harbor Freight. I have the 2000 pound trans jack, and I take them out like Kevin described.
4R100 in 4x4 Removal and Reinstall
I have a 2000 F250 4X4 here I need to take out and install a rebuilt 4R100.
My question is; can it be gotten out and reinstalled using a transmission floor jack?. I can't seen to get lift time anywhere.
My trans floor Jack is a Pittsburgh from harbor freight. The plate and corner posts on it create a platform, I cannot picture working. If I can overcome that and have no idea as of right now, how to. Will I have enough clearance on a 250 to even get it out.
Shop manual says there is a gasket between it and transfer case. I have not looked at that joint yet. Is it infact a gasket or just RTV.
Thanks for any help/ insight.
Nick
My question is; can it be gotten out and reinstalled using a transmission floor jack?. I can't seen to get lift time anywhere.
My trans floor Jack is a Pittsburgh from harbor freight. The plate and corner posts on it create a platform, I cannot picture working. If I can overcome that and have no idea as of right now, how to. Will I have enough clearance on a 250 to even get it out.
Shop manual says there is a gasket between it and transfer case. I have not looked at that joint yet. Is it infact a gasket or just RTV.
Thanks for any help/ insight.
Nick
1 - 2 of 9 Posts
Yup!! Mine are slotted so you can adjust the length between corners, and the uprights rotate.Those adjustable angle iron corners go at the 4 corners of the pan - they should make contact on the lip of the pan as close to the sides of the pan as you can get them. Then, with the strap in place, you've got 4 corner support and prevention against sliding in any direction. There is no force on the bottom of the pan this way.
1 - 2 of 9 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
The Diesel Stop
A forum community dedicated to all Ford Diesel owners and enthusiasts. Come join the discussion about PowerStrokes, performance, modifications, troubleshooting, towing capacity, maintenance, and more!
Full Forum Listing
Top Contributors this Month
View All
bugman
50 Replies
John in OkieLand
42 Replies
Big Horn
42 Replies
