[MGolden]

My 2010 van is going to quigley next month and I am looking for help with wheels. It will come home with the standard steel wheels. I want to change them to something much nicer. My question is what backspacing should I look for? I will be using the 8-170 (Superduty) pattern after the conversion. I plan on installing bushwacker flares and would like to the wheels to poke out a bit more than stock (1" max) for looks. So what backspacing will get me this look? one wheel I am looking at ATX Crawl black wheels that have a 4.52" backspacing. Wonder if these will be ok?

Matt

 

[carringb]

It will be Superduty backspacing. Quigley frowns upon anything different than that, because it can cause steering problems. Call them first. They may not even honor warranty claims associated with drivability if you don't run the specified backspacing.

 

[Ujoint]

I prefer as close to 4.5 as possible.

 

[msnunes]

FYI -- I'm using 2" wheel spacers to make my rears track the same as the front and fill up the space of the flares. Don't know how this affects your decision on wheels.

 

[MGolden]

I prefer as close to 4.5 as possible.

Cool, so it looks like the ATX Crawl's will be a good choice at 4.52