The Diesel Stop banner
1 - 2 of 2 Posts

· Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
Starts then may quit dead, not the fuel starving kind of quit. Cranks good but fuel to the IP but not to the injectors. I suspect FSS problem. Power to the FSS spade (the one closest to the front of the truck) but no audible clicking when connected. Can this be checked and replaced with the IP on the truck? What am I going to see when to cover comes off the IP?
 

· Registered
Joined
·
12,232 Posts
It can........ visit my photo link and there is a picture of the cover with FSS. I have a TSB with full instructions I can email later today/tomorrow. Just PM me your email and I will forward it.... the main caution is DO NOT hook the FSS arm under anything when installing the cover, it just slides down and back. If you do it wrong engine runaway on start is the result and shutdown is not possible with out major dangerous action on your part. Not to mention ruin an engine!!!!!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top