The Diesel Stop banner

'96 Powerstroke won't start

12377 Views 14 Replies 6 Participants Last post by  tobesswind
Replaced fuel mech fuel pump,fuel filter,rebuilt ipr,new icp and pigtail,new glow plugs,new valve cover gaskets the harnesses for under valve covers and the pigtails for outside of valve covers, all electrical connections were soldered and heatshrinked. Brand new interstate batteries. Truck cranks over , no smoke from tailpipe, tach is at about 300 rpms and it slightly jumps about 50 rpm or so .sometimes if I crank it long enough the cel light comes on but when I quit cranking it goes off and won't come back for a while. Kinda stumped because I've spent all this money and I've still got a yard ornament and I've got to move it soon because they are paving my road. Any suggestions? It will hit a lick or 2 on ether but won't stay running on its own
1 - 1 of 15 Posts
What brand of everything did you use?
If you used dorman, you wasted your time and money.
Just because you rebuilt the ipr doesn't mean Jack either. Usually the Solenoid is what fails.

Sent from my SAMSUNG-SM-G935A using Tapatalk
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.